LPG copper pipes are responsible for transferring the gas from the tank to an LPG valve. The copper pipe must resist 45 bar pressure. …..
The copper pressure-resistant copper pipe that comes out of the multivalve of the tank should be passed at least 150 mm from its exhaust. If you prefer to pass it at a shorter distance, you can put insulating material from the other side of the exhaust through the lower channels of your vehicle. You can attach holding latches at every 600 mm. It should be delivered at a place that will not cause damage to the regulator.
Stone is used as the outer surface of copper pipes. To improve impact resistance, the copper pipe is covered in plastic. The copper pipe cannot be passed through the driver's seat and fenders. It is common to misapply copper pipes by running them through the fenders. Due to the stones that are thrown from the tires, this application can cause the copper pipe’s puncture.
Copper pipes can also be affected by LPG. Over time they will harden and develop a brittle structure. Blockages may also occur from the corrosive effects. Copper pipes should not be used in this environment.