What are the maintenance and control methods for LPG vehicles? How do you maintain LPG vehicles
Driving more economical fuel is encouraged by abnormal increases in gasoline prices. Autogas systems are the most popular alternative fuel for gasoline vehicles. LPG fuel vehicle owners should make sure that their system is checked at regular intervals. While 10,000 km is the general rule, it can vary by brand. New generation systems require maintenance intervals that can reach 15-20 thousand km.
It is important to perform regular maintenance on your autogas system in order for it to function properly and remain reliable. A lot of information is not available about the history of a vehicle when you buy it used. You will feel more at ease if you do the required maintenance and inspections after buying the vehicle.
Controls and maintenance must be performed at authorized service centers using original parts. Repair kits for regulators should be replaced every 40-50 000 km. must also be replaced.
Maintenance and Control Operations for LPG Vehicles
LPG vehicles must function properly if there are no problems with the petrol system. The vehicle’s fuel system must be maintained and controlled regularly. This should not be stopped and done promptly. It is important to first fix any problems in the gasoline system. Then, you should check the performance of the LPG systems.
- * Electrical installation should be checked. It is important to check for any leakage or oxidation of the connections. You should replace sockets or cables that have wear, looseness, corrosion, or oxidation.
- * Dirt and foreign materials accumulated in the evaporator (Regulator) must be cleaned. Oil and dirt can accumulate every 20,000km. Must be emptied. The gas filter, in addition to oil adjustment and gas adjustment must also be checked.
- * The filter in the LPG electrovalve must be changed.
- * Repair kits of electrovalves and evaporator regulator should be replaced if necessary.
- * The condition of the main hose and connection components should be checked. It is important to inspect the hoses that hot water enters or exits through. The hoses must be replaced if necessary.
- * First and second stage pressure of the pressure reducer should be checked.
- * It should be checked whether dirt accumulates in the hole that meets the pressure on the diaphragm.
- * All clamps should be checked, whether there is a gas leak or not with a foam test or detector. It is important to check for any leakage in your filling nozzle or filling line.
- * It should be checked whether there is a problem in the gas/petrol transitions of the fuel selector switch and whether the leds on the switch show the fuel in the tank correctly.
- * Tank carrier bolts and tank belt should be checked.
Follow the above instructions to prolong the life of your autogas system. You will enjoy maximum performance and fuel savings.
