What is the P0136 fault code What is the Oxygen Sensor Circuit Malfunction (Bank 1)? How can I fix P0136 fault code What are the causes and symptoms of the P0136 error code?
What is the P0136 Fault code?
The voltage signal must be smooth for oxygen sensors to function properly. Low voltage negatively affects the sensors’ ability to work. The components can overheat and possibly damage themselves if they are exposed to high voltage.
P0136 means that the sensor behind the catalytic convert is experiencing a voltage problem. The O2 sensor is disengaged, which causes the load to be divided, making it harder for all of them.
The Engine Control Unit (ECM/ECU) continuously monitors the voltage values of O2 sensors. The ECM will set a code P0136 to alert the driver if the voltages do not match the specified specifications.
What are the symptoms for P0136 Fault Codes?
The P0136 code can cause no performance problems other than the flashing of the check engine light. Sometimes, these symptoms can be a sign of a malfunction.
- – The engine light should be on
- – Engine misfire or loss of power
- – Exhaust Leakage
- – Increased fuel use
What causes the P0136 Fault code?
There are many factors that can cause this malfunction, which vary depending on the vehicle’s make and model. You should always check the manufacturer’s service bulletins. You could have one of the following reasons if there are no service bulletins:
- – Catalyst failure
- – Exhaust leak
- – Defective oxygen sensor
- – Corrosion and damage to the connector
- – A short circuit in the signal circuit
- – Leakage of intake air
How do I fix the P0136 fault code?
The first thing to do is check the voltage in the circuit. The fault could be due to the sensor if the voltage is normal. If the sensor is damaged or malfunctioning, it may not function properly. It can be cleaned or replaced. It is important to inspect the whole circuit for any problems with voltage.
Examine cables and connectors for corrosion and damage.
Repair any parts that are suspect. Also, make sure to inspect the heater circuit for damage.
If everything is fine, you can check for exhaust leaks. If there are no leaks, inspect the catalyst converter carefully for damage or corrosion.
What is the importance of the P0136 Fault Code
This type of failure is not very important. You can cause more damage to your engine even if your vehicle’s running. O2 sensors are crucial in maintaining engine performance. It monitors the air/fuel mixture ratio and sends signals to the ECU in order to keep them at the optimal level. Although this temporary solution is available, it can be replaced with other sensors if one fails. The air-fuel ratio will eventually become affected, which can lead to higher fuel consumption. This can lead to engine malfunctions and performance issues.
